Multigrain

Entering Bootloader

Turn off power to your modular system.
Connect a USB cable from the rear of the module to your computer.
Hold down the BOOT button on the rear of the module and turn on power to your modular system.

From the version menu above, select the firmware version you will be updating to.
Click the Update button in the bottom of this window. You will see the progress of the update in the log window and your module may begin to flash. You will see an “Update completed successfully” message at the end of the update.
Turn your modular off and back on again, you're now ready to use your updated module.
If there are any problems please contact us via the Help button on our website. Be sure to include the full log window output, the firmware updater version downloaded, and the OS you are using.

New/Change: Save your Always Listening buffer without interrupting playback.
Long Pressing the sample button when it's slowly glowing blue to Assign/Save to a SOUND, or save to the SD card without interrupting play, this matched the behaviour of the standard record functionality; long pressing a 2nd time will enter the Advanced Sampling Page where you can trim the contents of your recording.
New/Change: CLEAR+SOUND 1-8 is now 2 stages.
First Tap will clear the reset the Sound Settings, but keep the sample, pressing again will clear the sample.
New: Init Preset Shortcut.
Press CLEAR+LOAD to start fresh, no Sounds, no Params.
New: Preset Locking (protect a preset from getting overwritten)
From the Save or Load Page, Hold the Preset slot for 4 seconds, it will turn PURPLE
New: Quantizer Copy/Paste across sounds.
From the ALT Page, hold QUANT and press the destination SOUND
New: Quantizer Edit All Sounds.
From the Quantizer Page, hold LATCH while pressing the NOTES to apply the Quantizer to all sounds.
Tweak: Randomizing a Sound (RAND+SOUND 1-8) now includes the 2 Link settings and Ping Pong.
Fixed: The Advanced Sample Page may open up with incorrect START/END positions.
Fixed: Long Pressing NEXT/PREV when browsing samples now aligns with manual ±5 samples at a time.
(was moving by ±10)
Fixed: Wider WAV compatibility, with less common file headers.
Minor Bug Fixes and Tweaks.
Updated manual available at intellijel.com/support.